Startseite BLOG Used Tunneling Equipment How to Choose a Used Drilling Rig for Tunneling: Atlas Copco Boomer M1L vs. Sandvik Axera 5-126
How to Choose a Used Drilling Rig for Tunneling: Atlas Copco Boomer M1L vs. Sandvik Axera 5-126

How to Choose a Used Drilling Rig for Tunneling: Atlas Copco Boomer M1L vs. Sandvik Axera 5-126

In drill-and-blast tunneling, the drilling rig sets the pace for the whole cycle. Every round starts with drilling: if the rig is too big for the heading, too slow, or constantly down for repairs, the loaders, scaling and shotcrete crews all wait. That is why the choice of rig matters so much – and why a used drilling rig in good condition is often the smartest investment for contractors and mines.

In this guide we explain what to look for when buying a used drilling rig (also called a jumbo or boomer). We then compare two single-boom rigs that are currently available at ITO Germany: the Atlas Copco Boomer M1L and the Sandvik Tamrock Axera 5-126. Both are built for small to medium tunnel sections, but they solve different problems.

In drill-and-blast tunneling, the drilling rig sets the pace for the whole cycle. Every round starts with drilling: if the rig is too big for the heading, too slow, or constantly down for repairs, the loaders, scaling and shotcrete crews all wait. That is why the choice of rig matters so much – and why a used drilling rig in good condition is often the smartest investment for contractors and mines.

In this guide we explain what to look for when buying a used drilling rig (also called a jumbo or boomer). We then compare two single-boom rigs that are currently available at ITO Germany: the Atlas Copco Boomer M1L and the Sandvik Tamrock Axera 5-126. Both are built for small to medium tunnel sections, but they solve different problems.

6 things to check before buying a used drilling rig

1. Tunnel cross-section – height and width Start with your heading, not with the machine. Check the maximum cross-section the boom can cover, and just as importantly the rig’s own height and width. In low headings the height decides; in narrow drifts it is the width. A rig that „almost fits“ will cost you time at every turn.

2. Boom and feed The boom determines how precisely and how fast the operator can position each hole. A boom with 360° rotation can also drill roof and side holes, for example for rock bolts. The feed length decides your round length: a 12 ft feed is a common standard for small and medium tunnels.

3. Rock drill (drifter) condition The rock drill is the heart of the rig and one of the most expensive components. Ask for the percussion hours, the service history and whether the drill has been overhauled. Check for oil leaks, worn bushings and the condition of the shank adapter.

4. Power supply on site Drilling is powered electrically from the tunnel grid, while the diesel engine is used for tramming. Make sure the rig’s voltage and frequency match your site power (for example 690 V / 50 Hz). Converting the electrical system later is costly.

5. Carrier: engine, axles, tires, articulation Check the diesel engine, the axles and the articulation joint for play and leaks. New or good mining tires save a considerable amount of money. Ground clearance and turning radius matter in rough, winding tunnels.

6. Cab, safety and documentation A FOPS/ROPS-certified canopy or cab is a must underground. An overpressure cab with air conditioning protects the operator from dust and heat. Operator manuals and parts lists make maintenance much easier – always ask for them.

Atlas Copco Boomer M1L: the low-profile specialist

The Boomer M1L belongs to Atlas Copco’s (today Epiroc) Boomer M series, which was designed for low to medium-height mines and tunnels. With a height of only 1,800 mm it fits into headings where many other rigs simply cannot operate. At the same time it is a heavy, robust machine with strong axles and a reinforced articulation, built for tough underground conditions.

The single-boom rig covers cross-sections of up to 36 m². Our unit from 2013 comes with a BUT 29 boom, an overpressure cab with air conditioning and new 12.00xR24 mining tires – a clear plus for operator comfort and running costs.

Key data:

  • Weight: 17,000 kg
  • Dimensions (L × W × H): 13,570 × 2,400 × 1,800 mm
  • Ground clearance: 378 mm
  • Engine: Deutz TCD2012, water-cooled, 83 kW (113 hp)
  • Electric power: 55 kW, 690 V / 50 Hz
  • Turning radius: 6,550 mm outside / 3,800 mm inside
  • Fuel tank: 110 l
  • CE marked

See the Atlas Copco Boomer M1L listing

Sandvik Tamrock Axera 5-126: the narrow and agile all-rounder

The Axera 5-126 comes from the Tamrock tradition, today part of Sandvik. It is designed for mine development and tunneling in cross-sections of up to 38 m². Its big advantage is its compact footprint: with a width of just 1,750 mm and a weight of around 12,000 kg it is considerably narrower and lighter than the Boomer M1L. That makes it easy to transport and ideal for narrow drifts and small tunnels.

The B26F universal boom rotates 360° and offers fully automatic parallel holding. This lets the operator drill face holes, roof holes and side holes quickly and precisely – useful when the same rig also has to drill for rock bolting. The HLX5 rock drill delivers 20 kW of percussion power.

For tramming between faces, the Axera reaches up to 12 km/h and climbs gradients of up to 35%, so it also copes well with steep ramps in mines.

Key data:

  • Weight: approx. 12,000 kg
  • Length: 10,855 mm
  • Width: 1,750 mm
  • Cross-section: up to 38 m²
  • Boom: B26F universal boom, 360° rotation, automatic parallel holding
  • Rock drill: 1 × HLX5, 20 kW
  • Power pack: 1 × HP 560, 55 kW electric
  • Travel speed: up to 12 km/h
  • Gradeability: up to 35%

See the Sandvik Axera 5-126 listing

Boomer M1L vs. Axera 5-126 at a glance

Atlas Copco Boomer M1LSandvik Tamrock Axera 5-126
TypeSingle-boom drilling rigSingle-boom drilling rig
Max. cross-sectionup to 36 m²up to 38 m²
Weight17,000 kgapprox. 12,000 kg
Length13,570 mm10,855 mm
Width2,400 mm1,750 mm
Height1,800 mmsee listing
Diesel engineDeutz TCD2012, 83 kWDeutz
Electric power55 kW, 690 V / 50 Hz55 kW power pack
BoomBUT 29B26F universal, 360°
Rock drillsee listingHLX5, 20 kW
CabOverpressure cab with A/Csee listing
Biggest strengthVery low height, heavy-duty buildNarrow, light, agile

The short version: the Boomer M1L wins when height is the limit, the Axera 5-126 wins when width is the limit.

Which rig is right for your project?

Choose the Atlas Copco Boomer M1L if …

  • your headings are low, for example in flat-lying ore bodies or low mine drifts
  • you need a heavy, stable rig for hard rock and long-term production
  • operator comfort matters: the overpressure cab with A/C makes long shifts in dusty or hot conditions much easier
  • your site runs on 690 V / 50 Hz

Choose the Sandvik Axera 5-126 if …

  • your tunnels or drifts are narrow, for example utility tunnels, hydropower adits or exploration drifts
  • the rig has to be transported often between sites – 12 tonnes are much easier to move than 17
  • you also want to drill roof and wall holes with the same boom
  • your mine has steep ramps between levels

Not sure which one fits? Send us your tunnel dimensions, rock type and site power supply. Our team will gladly help you find the right machine – from these two rigs or from our wider range of used tunneling and mining equipment.

ITO Germany inspects every machine before sale and ships worldwide.

    Melde dich an um die neuesten
    Nachrichten rund um die Baumaschine zu bekommen

    © 2024 ITO Systems - Marktplatz-Tool 5.0. Alle Rechte vorbehalten.